For the bottom of the drawers, I decided to go with White Pine. I found a scrap piece of about the right size and 3/4” thickness and re-sawed it with the big frame saw after starting the kerf with my kerfing plane. You can see a few saw marks on the result, but after dimensioning with a Jack plane, the resulting pieces were still over 5/16” thick. #OpenWallCabinet #OpenCabinet #WallCabinet #HangingCabinet #Cabinet #WhitePine #Pine #HandToolsOnly #MadeByHand #Woodworking
The first drawer is all glued up. The clamps were pulling it a bit out of square, so I took them off. You can see the sides are very slightly proud; I also oriented their grain so I can plane them from the front of the drawer to make fitting the drawer into the open cabinet easier. #OpenWallCabinet #OpenCabinet #WallCabinet #HangingCabinet #Cabinet #WhiteOak #Oak #RusticBeech #AmericanBeech #Beech #HandToolsOnly #MadeByHand #Woodworking